The owner of a car they're looking for more power to be to give his car would have no restriction on when to remove the exhaust gases. You have to let the exhaust gases to flow smoothly from the vehicle. Since catalysts are very restrictive, many people opt for straight pipes on their cars and trucks. They are completely eliminate the catalyst. Depending on the state where you live, this may be illegal, but if you use the car for performance or just for drag racing and not forpurposes every day, then there should be no problem.
1 You need your car or truck of high quality jacks and stands to increase. Make sure it is secure under, before it is anything to go by car.
Exhaust System
2 The next step is to find catalysts in the exhaust. This oval is a part of the system, and swells. Depending on the year, would have a few slats or louvers. Cut with a jigsaw with metal blade, the catalytic converterfrom the exhaust. Make sure it is a perfect cut to produce the straight line is, is.
3 Get the replacement hose, place the catalyst can then be used to mark the tube with a permanent marker to the correct length is cut. Also cut with a jigsaw of the new pipe to the desired length.
4 With the welding MIG welding of exhaust pipe walls, which lies between the two spaces of the exhaust gases. The tack welding is a welding so small and fastThis protects the two pieces together. This is only temporary. You must ensure that the alignment is straight and that before a weld could be made permanent, there are no gaps between the tubes.
5 Take the gloves and helmet for welding on the pipe and fully welded together. Always check that the tube without breaks, to ensure that no leaks have.
6 Remove the bush, all clear and test your car.
How to be a straight pipe exhaust system
No comments:
Post a Comment